By Tomahawk Automotive in Markleville, Indiana
If your steering wheel sits crooked while you’re driving straight, or the inside edge of a tire is wearing out while the rest still looks good, it’s time to check your alignment. A properly aligned vehicle tracks more predictably, and its tires can wear more evenly. That matters whether you’re trying to get more miles out of your current tires or protect a new set.
At Tomahawk Automotive, we use alignment equipment to measure how your wheels sit and where they point. We compare those readings with the manufacturer’s specifications for your vehicle, then adjust the angles your suspension and steering system allow. Front toe is typically adjusted at the tie rods. Depending on the vehicle, camber, caster, and rear toe may have their own adjustment points. During a four-wheel alignment, we also measure the thrust angle, which tells us whether the rear wheels are tracking in line with the vehicle’s centerline.
Look at the vehicle from the side and picture a line through the points the front wheel pivots around when you steer. If the top of that line leans toward the rear of the vehicle, that’s positive caster. Positive caster helps the vehicle hold a straight line and helps the steering wheel return toward center after a turn. Too little can make the vehicle feel like it wanders, and a side-to-side difference can contribute to a pull. Caster usually has less direct effect on tread wear than camber or toe.
Look at the vehicle from the front or rear. If the top of the tire leans inward, that’s negative camber. If it leans outward, that’s positive camber. Too much negative camber can wear the inside edge of the tread, while too much positive camber can wear the outside edge. A difference in front camber from one side to the other can also contribute to a steering pull. A slight tilt can be normal when it falls within the manufacturer’s specifications.
Look down at the vehicle from above. If the front edges of the tires on the same axle point toward each other, that’s toe-in. If they point away from each other, that’s toe-out. When toe is too far out of spec, the tires scrub sideways slightly as they roll. That can wear them quickly and leave a sawtooth feel across the tread called feathering. Incorrect toe can also make the vehicle feel less steady or leave the steering wheel off-center.
Get it checked if your vehicle pulls on a reasonably flat road, the steering wheel is off-center, or you notice uneven tire wear. It’s also worth checking after a hard pothole or curb impact, or after steering or suspension repairs that can change the wheel angles. If an angle is out of spec and the vehicle has limited adjustment, or if a part is loose, worn, or bent, we’ll explain what we found and what needs attention before the alignment can be set correctly.
Schedule an alignment check with Tomahawk Automotive at TomahawkAutomotive.com or call 765-703-2800.

Tomahawk Automotive
9335 south Tomahawk Trail Markleville IN 46056
(765)703-2800 or toll free 1-888-539-2470